Laing Motor Controller ranges (LMC)
The LMC series is optimized for applications where each motor has to be controlled individually to control several independent movements. The motors can be controlled via control panels, whereby first, the desired motor has to be selected, then the movement can be initiated.
The motors also can be controlled by a higher-level control, such as a PLC or a PC. Every controller is equipped with an RS485 bus. The control panels, with height indication, communicate with the controller through this bus. As a protocol ModBus is used. Through the ModBus it is possible to acquire all information contained in the controller and to make all kinds of settings. Of course, multiple controllers can also be controlled via the bus, in which case, individual bus addresses have to be assigned to the controllers.
The controllers can be supplied with an integrated BLE or WiFi module. This allows the controller to be easily and cost-effectively integrated into higher-level control systems or to communicate with a smartphone or PC.
LMC
- Controller for 1 to 4 motors
- all motors can be controlled individually
- 230 or 115 VAC version
LMCB
- Controller for 1 to 4 motors
- all motors can be controlled individually
- with accumulator 86 Wh
LMCD
- Controller for 1 to 4 motors
- all motors can be controlled individually
- 24 to 32 VDC
