LTCD direct current
The LTCD series is designed for connection to 10 V - 36 V DC power sources. It is suit- able for the use in cars, trucks, RVs, boats and wherever low volt DC is available.
For applications where the power supply or the DC supply for the controller is only to be switched on when required, the controller has a 5 V input in addition to the input for the DC voltage. If this is supplied with 5 V, the controller outputs 5 V at one output as soon as a movement is requested by the control panel. The 10 V - 36 V supply can then be switched on. After completion of the movement, the signal drops out again and switches off the supply.
TECHNICAL DATA & TYPE OVERVIEW
LTCD range | direct current | |||
---|---|---|---|
TYPE | LTCD 302 | LTCD 383 | LTCD 384 |
Max. power | 300 W | 450 W | 600 W |
Supply voltage | 10 V - 36 V | 10 V - 36 V | 10 V - 36 V |
Supply current | 15 A | 22 A | 30 A |
Supply frequency | DC | DC | DC |
Output voltage | 80% of supply voltage | 80% of supply voltage | 80% of supply voltage |
Total output current | 15 A | 22 A | 30 A |
Motor channels | 2 | 3 | 4 |
Max. current per channel | 9 A | 9 A | 9 A |
Continuous duty up to | 100 W total load | 100 W total load | 100 W total load |
Standby power 12 V | 80 mW | 80 mW | 100 mW |
Standby power 24 V | 180 mW | 180 mW | 220 mW |
Size | 38,5 x 62 x 265 mm | 38,5 x 62 x 265 mm | 38,5 x 62 x 265 mm |
Measurement LTCD |