LTCB Battery
In the LTCB series, the switching power supply is replaced by an 97 Wh battery. The controller uses the same configuration file as the mains controller.
The swappable battery pack is located directly in the controller so no additional component has to be mounted or connected. The big capacity of the battery pack enables a long operation without recharge.
The battery pack can be changed easily. It can be charged inside or outside the controller. The external charging option ensures that there is always a charged battery pack in the controller.
4 LEDs on the battery pack indicate – after pressing the red button – the current state of charge. Charging takes place using a world voltage plug-in power supply unit.
Because of the low standby power of 5 mW the controller can be left in standby mode for up to 18 months and is still going to be able to operate the application.
TECHNICAL DATA & TYPE OVERVIEW
| LTCB range | battery | |||
|---|---|---|---|
| TYPE | LTCB 302 | LTCB 383 | LTCB 384 |
| Max. power | 300 W | 380 W | 380 W |
| Input | internal accumulator | internal accumulator | internal accumulator |
| Output voltage | 24 V | 24 V | 24 V |
| Total output current | 15 A | 19 A | 19 A |
| Motor channels | 2 | 3 | 4 |
| Max. current per channel | 8 A | 8 A | 8 A |
| Continuous duty up to | 100 W total load | 100 W total load | 100 W total load |
| Standby power | 5 mW | 5 mW | 5 mW |
| Size | 38,5 x 62 x 303 mm | 38,5 x 62 x 303 mm | 38,5 x 62 x 303 mm |
| Measurement LTCB | |||