LMCB Battery
In the LMCB series, the switching power supply is replaced by an 86 Wh accumulator. The controller is only slightly longer than the LMC series. The mounting points are identical for all series. The controller is mounted, connected and configured in the same way as the standard controller with power supply.
The battery pack is inserted at the end at which the mains plug is plugged in for the LMCB series. The capacity of the accumulators is generously dimensioned, as a rule operation over several months is possible.
The battery pack can be changed easily. The battery pack can be charged inside or outside the controller. The external charging option ensures that there is always a charged battery pack in the controller.
4 LEDs on the battery pack indicate – after pressing the red button – the current state of charge. Charging takes place via a world voltage plug-in power supply unit.
TECHNICAL DATA & TYPE OVERVIEW
| LMCB range | battery | |||
|---|---|---|---|
| TYPE | LMCB 302 | LMCB 383 | LMCB 384 |
| Max. power | 300 W | 380 W | 380 W |
| Supply voltage | internal accumulator | internal accumulator | internal accumulator |
| Supply current | 24 V | 24 V | 24 V |
| Supply frequency | 15 A | 19 A | 19 A |
| Motor channels | 2 | 3 | 4 |
| Max. current per channel | 12 A | 12 A | 12 A |
| Continuous duty up to | 100 W total load | 100 W total load | 100 W total load |
| Standby power | 250 mW | 250 mW | 250 mW |
| Synchronization | through bus | through bus | through bus |
| Size | 38,5 x 62 x 303 mm | 38,5 x 62 x 303 mm | 38,5 x 62 x 303 mm |
| Measurement LMCB | |||